The Access LED Lighting System for Truck Beds # A80312 measure 18-inches long x 1/4-inch wide. This lighting system has 30-LEDs and requires 3 AA batteries for operation. view full answer...
The UWS Truck Bed Side Rail Toolbox # UWS04013 that you referenced weighs just about 30 pounds. Its aluminum construction allows for this light weight while also maintaining a durable and rustproof unit. view full answer...
The Andersen Ultimate # AM3200 has three height adjustments measured from the top of the fifth wheel rails:
18" Upper position
16-7/8" Middle position
15-3/4" Lower position
You'd have to measure from the truck bed height to the ground, the bed rail height, and the overhang height of your trailer with it level to determine if any of the height settings would work for you. Keep in mind you need to have around 6 inches of clearance from the bed rails to the truck overhang. view full answer...
The Access TonnoSport # A22020289 will keep moisture out of the bed of the truck but would not be considered waterproof. If it was raining pretty hard water is going to make it's way past the Velcro of the cover into the bed, but if it's a light rain it would keep everything dry. view full answer...
As long as the truck has the capacity to tow the trailer, loaded and ready to tow, then you will be good to go. The big thing with heavy duty towing is torque and not necessarily power. Generally speaking the 3/4 and 1-ton diesel trucks offer more of both torque and power but it might be overkill for a light weight trailer like the one you bought.
The PullRite SuperGlide hitch is not one that we carry but there is a better option; the Demco HiJacker Auto-sliding hitch. There are a few... view full answer...
I did some online research on your 2004 Chevrolet Silverado. From the tongue weight capacity I was able to find, your truck should have no problem with the MaxxTow 30x50 Wheelchair Carrier # MT70106 and your sons power wheel chair. Just to make certain, you will want to consult either with your dealership or your owners manual to find the tongue weight capacity.
One of my coworkers bought one of these and told me that the ramp on the carrier is not designed to be removed. It does store... view full answer...
I went and pulled an Access LED Lighting System part # A80312 from our warehouse to measure the dimensions of the battery box.
I found that the length of the box is 3-1/2 inches, the width is 2-1/8 inches and the depth of the box is 15/16 inches. view full answer...
For the Tandem Axle Teardrop Trailer Fenders for Boat Trailers - Steel - 14" Wheels # HP54VR, it really depends on how you install the fenders. If you bolt the fenders onto your boat trailer, they will definitely not be able to accommodate 300 pounds. If you weld the fenders on your trailer and include angled iron brackets for support like the # CE26236, this will get you closer to a 300 pound weight capacity (even though we cannot confirm this for sure).
As far as using truck bed liner... view full answer...
As far as the fitment of the Aries Switchback Headache Rack # AA1110109, that part will not fit either your 2018 Chevy Silverado 3500 or your 2021 Chevy Silverado 2500. While we do carry a Switchback model that will work with your 2018 Chevy Silverado 3500, we also offer some great options for headache racks for your 2021 Chevy Silverado 2500.
For the Switchback Headache Rack that will fit your 2018 Chevy Silverado 3500 (both 6-1/2 and 8-foot beds), you will need the Aries Switchback Headache... view full answer...
Yes, if your truck was confirmed as having a towing capacity of 11,300 lbs then it could easily tow a 9,600 lb trailer like you mentioned. If you can get me the year and bed length of your truck I can help you pick out the best hitch and rail kit option for your needs. view full answer...
The Draw Tite hitch part # 41947 that you referenced actually is height adjustable. From the mounting surface (truck frame) down to the hitch opening can be 6-5/8, 8-1/4 or 10-1/4 inches. view full answer...
Your 2017 Ram 2500 should have at least 5" to 6" from the top of the bed sides to the fifth wheel's overhang. If you are encountering sway a weight distribution system would be the best option to make towing a more enjoyable and safer experience. In order to choose the best weight distribution system you will first need to know your total tongue weight (TTW), which is the tongue weight of your fully loaded and ready to go trailer plus the weight of any cargo behind the rear axle of your... view full answer...
The overall weight capacity of the Truck Trolley Truck Bed Slide Out Tray # TR87VR is 300 lbs. This is the same as the capacity when it is in the truck bed. When you slide it out and it overhangs the tailgate the capacity is 100 lbs. view full answer...
It most likely won't because you have a flat bed but I have one that will. For your 1975 Chevy C20 you will want the B&W Turnoverball Underbed Gooseneck Trailer Hitch for Flatbed Trucks item # BWGNRK1500. This system is designed specifically for flat bed pick up trucks. It does require welding.
The B&W Turnoverball item # BWGNRK1400 you were looking at is designed for standard truck beds and fits a 1976 Chevy C20. However, it mounts right on top of the frame so the ball can stick out... view full answer...
Yes, the Yakima BedRock HD Truck Bed Rack item # Y01160-58 is the complete set but it is just a set of crossbars that go over the bed of your 2023 Nissan Frontier. These attach directly to your bed sides with included adjustable locking clamps. They fit the Frontier's without the utili-track system.
There are no towers because this isn't a ladder rack even though it is categorized under that section. There are only two options for ladder racks that fit without the utili-track system and... view full answer...
I am showing that the BedRug Custom Truck Bed Mat - Bed Floor Cover # BMQ17SBS is a confirmed fit for the 2020 Ford F-350 with the 6-3/4' bed. Per your request, here are the dimensions of this truck bed mat: 80" long, 64-1/8" wide at the back, and 49-5/8" wide at the front. I also attached a helpful diagram to illustrate these dimensions. view full answer...
Because the 5th wheel trailer hitch will be centered over the rear axle or slightly in front of it on a short or long bed truck, the result will be the same. One will not squat more than the other.
So what you have said about the prep package for the 2011 and newer Ford trucks is true.
It is better to go with a long bed truck for 5th wheel towing because with a short bed you will probably either need a slider hitch or a Sidewinder replacement pin box in order to make tight turns without... view full answer...
The outside dimensions of the Du-Ha Humpstor Truck Bed Storage Box # DU70200 are 55" long x 9-3/4" wide x 9" tall. The width of 55 inches means it would fit up front in the truck like a standard truck bed toolbox. Most are right at 60 inches in width. view full answer...
The UWS Truck Bed Chest # UWS01035 weighs 50 lbs total and is a somewhat larger size, but if you are reasonably strong you could maneuver it in and out of a truck bed. It would be much easier with a buddy though. view full answer...
Yes, the Black Armour Heavy-Duty Custom Truck Bed Mat - Rubber - Black # BA34AR is exactly what you're looking for to fit the bed of your 2022 GMC Sierra 3500 with an 8' bed. view full answer...